How to replace windshield washer reservoir on a chrysler pacifica

Question

How To Replace Windshield Washer Reservoir On A Chrysler Pacifica?

Answer

Here is a short explanation for replacing your windshield washer reservoir for your pacifica

1. Disconnect and isolate the battery negative cable.

2. Hoist vehicle.

3. Remove screws at the left wheel opening splash shield.

4. Remove the lower fascia push pins.

5. Remove upper bolts at ends (ears).

6. Disengage lower fascia to grille clips.

7. Pull away fascia as necessary to access reservoir.

8. Remove three reservoir retaining bolts .

9. Lower reservoir from filler tube.

10. Remove the one retaining bolt at upper filler tube .

11. Maneuver tube from engine compartment.